Please send the following informations to support%mirifica.eu:
- Company name
- E-mail address of the administrator
- IMEI of the device
contact us, and explain your issue.
Yes. Please contact us, and explain your issue.
Please check, it will help you to install https://wiki.teltonika-gps.com/view/.NET_Runtime_for_Desktop_installation
You should connect the buzzer or LED lamp to DOUT1 or DOUT2 and activate it in the configuration
In Deep Sleep and Online Deep Sleep modes, the device does not support 1-wire. In Sleep mode, it will work properly.
Yes, You can use the Ibutton in combination with the buzzer (in this case, You need to use Immobilizer scenario)
Set ignition source to DIN1.
Connect buzzer to DOUT interface (DOUT1 for example).
Input authorised iButton IDs in a configurator.
Yes, You can run RMS on a separate server, RMS has a local version which can be run on a separate server.
The license is valid for 30 days for one supported device.
To enable/disable the "auto-extend" option, please follow these steps:
navigate to Administration - Companies;
from the list of companies, found the required company and click "i" (View company details);
in a new window, under the tab "Devices" will be an option to control "auto-extend
You can see the remaining amount of credit by going to Administration -> Companies. Select the desired company and then go to Resource history. There you can see when credits were added and how many credits are left. You can also see when and which device has used up the credit after downloading the PDF file.
Please check, it will help you to install
.NET Runtime for Desktop installation - Wiki Knowledge Base | Teltonika GPS
You should connect the buzzer or LED lamp to DOUT1 or DOUT2 and activate it in the configuration
In Deep Sleep and Online Deep Sleep modes, the device does not support 1-wire. In Sleep mode, it will work properly.
Yes, You can use the Ibutton in combination with the buzzer (in this case, You need to use Immobilizer scenario)
Set ignition source to DIN1.
Connect buzzer to DOUT interface (DOUT1 for example).
Input authorised iButton IDs in a configurator.
Web Tacho supports LISLE card reader rack. So with one single USB to one PC, you can connect more than 10 company cards. There is different racks, which support 6, 20 or even 120 company cards.
Web Tacho does not support API. Web Tacho supports FTP file synchronization, so all downloaded DDD files can be transfered to your configured FTP server.
From device side, you will need to configure domain and PORT where devices should automatically connect. You will need to register devices and to create schedules. Devices can be imported via CSV files.
Check firewall settings and make sure that PORTS: 29000-29003 are accessible from the inside of the network ( Also when working with Remote Smart Card reader software, it's better to ask for software logs, which are located: C:\Program Files (x86)\Teltonika\SCard Reader\Service\Logs)
Either the vehicles Ignition must be either OFF or CAN2 wires are not connected to the tachograph (instructions for connection: https://wiki.teltonika.lt/view/FMB640_and_Tachograph_Solution)
AVL_ID for "Tacho Data Source" is AVLID=48
To change any Login password, you should select the login, press "Edit" button. Then type in the new password into the "Password" and "Verify Password" fields. After these actions simply press "Save" button. So, new password will be saved.
For each order, you will receive the following documents:
- Order confirmation
- Delivery note
- Invoice
- Please log in and open "MY account".
- Navigate to "Order history" to see all your orders
- Click on the eye on the right to see all the details about the order.
