Reyax
RYS8833_LITE: Ultra Low Power 1.8V UART/I2C interface GNSS module DIP Version
Ultra Low Power 1.8V UART/I2C interface GNSS module DIP Version
Référence de l’article: VAR-827001806
Numéro de produit du fabricant: RYS8833_LITE
Code douane: 85177900
Disponible pour expédition immédiate: ${ $store.getters.currentItemVariation.stock.net }
Retard d'expédition prévu au-delà du stock disponible: 2 à 4 semaines
Article situé / expédié de : Riedlingen, Allemagne
23,00 EUR
*
Contenu
1 pièce
* Hors TVA hors Frais de livraison
Description
The RYS8833 is a multi-GNSS module with high sensitivity, the RYS8833 also has integrated digital noise filters and spectrum analyzer.
◆ SONY CXD5605AGF Engine
◆ A multi-GNSS module for GPS (L1 C/A), GLONASS (L1 OF), SBAS (L1 C/A), QZSS (L1 C/A), BeiDou (B1 TBD) and Galileo (E1 CBOC TBD)
◆ Including SAW filter, LNA and TCXO
◆ Embedded digital noise filters and spectrum analyzer
◆ UART / I2C Interface optional
| ID de l’art. | 101518 |
| État | |
| Modèle | RYS8833_LITE |
| Fabricant | Reyax |
| Pays de fabrication | Taiwan |
| Contenu | 1 pièce |
| Poids | 110 g |
| Poids net | 100 g |
Features
Specification
| Item | Min. | Typical | Max. | Unit | Condition |
|---|---|---|---|---|---|
| Power Supply Voltage | 1.71 | 1.8 | 1.89 | V | VDD |
| 0.9 | 1.8 | 1.95 | V | VDD_LDO_IN |
GNSS continuous mode
| Item | Min. | Typical | Max. | Unit | Condition |
|---|---|---|---|---|---|
| Satellite acquisition Current | 19 | mA | |||
| Satellite tracking Current | 13 | mA | |||
| Idle Current | 3.7 | mA | |||
| Sleep2 mode current | 0.2 | mA | |||
| Satellite acquisition Current | 11.5 | mA | Use buck regulator | ||
| Satellite tracking Current | 8.2 | mA | Use buck regulator | ||
| Idle Current | 3.3 | mA | Use buck regulator | ||
| Sleep0 mode Current | 0.5 | mA | Use buck regulator | ||
| Sleep1 mode Current | 0.26 | mA | Use buck regulator | ||
| Sleep2 mode Current | 0.26 | mA | Use buck regulator |
GNSS low power mode
| Item | Min. | Typical | Max. | Unit | Condition |
|---|---|---|---|---|---|
| Satellite tracking average current | 2.6 | 8.2 | mA | Use buck regulator @GSOP command Sleep1 and normal mode cycle | |
| I2C slave | 2C clock : 400kHz Address length : 7 bits Slave address : 0x24 | ||||
| Default Baud Rate | 115200 | bps | 8, N, 1 | ||
| Digital input level high | 0.7*VDD | VDD+0.3 | V | VIH | |
| Digital input level low | -0.3 | 0.3*VDD | V | VIL | |
| Digital output level high | 0.8*VDD | VDD | V | VOH 2mA | |
| Digital output level low | 0 | 0.2*VDD | V | VOL 2mA | |
| Flash size | 8 | M-bit | |||
| GNSS Center Frequency | 1561.098 1575.42 1602.5625 | MHz | BeiDou GPS Glonass | ||
| Navigation update rate | 1 | Hz | |||
| Accuracy | 1 | M | Signal strength is -130dBm | ||
| Cold starts | 35 | Sec. | Signal strength is -130dBm | ||
| Hot starts | 1 | Sec. | |||
| Tracking Sensitivity | -161 | dBm | |||
| Hot starts Sensitivity | -160 | dBm | |||
| Cold starts Sensitivity | -147 | dBm | |||
| Operating Temperature | -40 | 25 | +85 | °C | |
| Dimensions | 11mm*8mm*2.2mm | ||||
| Weight | 0.37 | g |
